Re: [DML] Re: front lower control arms
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [DML] Re: front lower control arms



Steve,

One of our custom manufacturing suppliers is currently in the process of
fabricating a remanufactured replacement lower link, as soon this item is
ready for distribution we will make it available at our on line store.

DMC Joe

"We're here to help you"

DMC Help / De Lorean Services / <dmchelp@xxxx>
Web Site: (TEMPORARY)<www.geocities.com/dmcjoe>

----- Original Message -----
From: Steve Rubano <srubano@xxxx>
To: <dmcnews@xxxxxxxxxxx>
Sent: Saturday, January 13, 2001 5:25 PM
Subject: [DML] Re: front lower control arms


> Walt,
> I had the same problem with my lower front control arms. I brought
> them to Rob at PJ Grady to get new bushings pressed in. After just
> glancing at them he said that the arms looked bent. He then compared
> them to a NOS one he had and indeed they were. They are VERY hard to
> find and if you do find them they are VERY expensive. My suggestion,
> send them on over to Rob, let him look at them and see if he can
> straighten them out for you. He fixed mine! :)
>
> Steve







Home Back to the Home of PROJECT VIXEN 


Copyright ProjectVixen.com. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive

This site contains affiliate links for which we may be compensated