Re: [DML] Re: A comment on metrics
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [DML] Re: A comment on metrics



In a message dated 1/13/01 3:48:23 PM Central Standard Time, rbrogren@xxxx 
writes:


> Andy, my apologies! 
> It was very obvious that you were referring to a "windage" measurement and 
> I 
> am sure that everybody that read your post, including me, was aware of that.
> Two observations made me write what I did:
> - After living in this country for 40 years and working all of them in one 
> engineering capacity or another, I am still amazed that we are using the 
> measurement of 1/2 of one of your old kings thumb as a basis for all length 
> measurements! I still have problems with splitting fractions!
> - After reading the avalance of opinions and increasingly derogatory 
> comments 
> regarding pro & con's of different brands and suppliers of suspension 
> components, I thought it was time to enter a lighter subject!
> 
> I buy you a drink if we meet in Ireland!
> :-)
> Roger
> 

Well Roger, 

I live in Fargo, North Dakota and i will probably never go to ireland. but 
you sure can send me a bottle of scotch if you really are serious! j/k

i agree - this list is getting a little dramatic at times!! let's face it - 
opinions will always dominate the world!

Andy

Soma576@xxxx
1982 DeLorean DMC-12 VIN#11596
Fargo, ND 58102


[Non-text portions of this message have been removed]






Home Back to the Home of PROJECT VIXEN 


Copyright ProjectVixen.com. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive

This site contains affiliate links for which we may be compensated