RE: [DML] Lowering the Front Springs
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: [DML] Lowering the Front Springs



Willie , 

Your driving a Deolrean, not a Civic. Cutting a coil spring changes the drop
rate , bind rate and pre-compression. I suggest replacing the front
springs. David Raine from AT Auto Spring Warehouse in Carneyspoint NJ custom
made new front Delorean springs 15% stiffer and 45 mm (1 7/8" US) shorter
for under $150.00 US including shipping. Here is his phone number and
address. 

856-299-9141 DAVID RAINE AT AUTO SPRING WAREHOUSE

David Raine
425 harding highway 
Carneyspoint NJ 08069

Thanks
~Bryn




-----Original Message-----
From: wmack [mailto:wmack@xxxx]
Sent: Wednesday, January 03, 2001 10:07 AM
To: dmcnews@xxxxxxxxxxx
Subject: [DML] Lowering the Front Springs


I read in Delorean World that you could lower the front end of simply
cutting 
a couple of coils off of the original springs, rather than buying the new 
lowered springs. Has anyone had any success with this? and is it reliable?

Thanks
Willie
Vin 5043



Before posting messages or replies, see the posting policy rules at:
www.dmcnews.com/Admin/rules.html

To address comments privately to the moderating team, please address:
moderator@xxxx





Home Back to the Home of PROJECT VIXEN 


Copyright ProjectVixen.com. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive

This site contains affiliate links for which we may be compensated