Re: [DML] spedometer = estimateometer
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [DML] spedometer = estimateometer



Try putting some foam tape on the inside of the wheel where it contacts the
plastic cap. The cap itself has been known to slip because of a poor fit
between the hub and the wheel. It solved my bobbing speedometer.

Bruce Benson


> When I bought my car, the spodometer wasn't working. After replacing the
> stripped out plastic cap, it kind of worked, but constantly bobbled up and
> down, so I never really knew how fast I was going. So now I'm certain that
>the lower cable, angle drive, and cap are
> all just fine, but still, my spedometer estimates my speed. It will bob
> back and forth within about a 20 mph range. Any ideas on how to fix this?
>
> -Christian







Home Back to the Home of PROJECT VIXEN 


Copyright ProjectVixen.com. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive

This site contains affiliate links for which we may be compensated