Re: Torque settings
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Torque settings



gwells@xxxx wrote:

> Happy Christmas and a successful New Year to everyone.
>
> I have one little question to which I need an answer as soon as possible
> if anyone feels able to help.
>
> I have the engine and gearbox out at the moment and I am about to
> reinstall them. However I cannot be sure what the torque setting
> should be for the 4 bolts that attach the transmission clutch housing to
> the engine. My manual gives a setting for the clutch housing to engine
> shield of 14lbs/ft Is this the setting (it seems lower than I would have
> expected)
> There does not seem to be any other setting that comes near the
> description I would give for the bolts.
> I am hoping to replace the engine in the car today so any speedy
> response would be welcome.
>
> Graham UK
>
> VIN 17152
>

The correct setting is 37 ft lbs. Happy Holidays to All
Rob Grady
P.J. Grady Inc_________________________________________________________________





Home Back to the Home of PROJECT VIXEN 


Copyright ProjectVixen.com. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive

This site contains affiliate links for which we may be compensated