Re: T Panel removal
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: T Panel removal



Start by removing the plastic strip over the rear window under the 
rear louvre. You do that by taking off the cover of each screw(if
it's 
still there) and removeing the 3 screws. Rotate the bottom out first 
and be careful, they are not obtainable anymore. Next remove the 6 
screws under the weatherstripping on top toward the rear of the 
doors(3 on each side) Now carefully lift the t panel from the rear
and 
gently pry upward breaking the glue seal in the center and unhooking 
the front.When replacing use foam padding to hold up the center of
the 
panel and center it so the doors don't rub it when they are fully 
open. Be especially careful of the edges of the stainless steel, THEY 
ARE EXTREMALY SHARP.
David Teitelbaum
vin 10757



--- In dmcnews@xxxxxxxxxxx, wmack <wmack@xxxx> wrote:
> HOw do you take off the T Panel without damaging it?
> 
> Thanks
> Willie






Home Back to the Home of PROJECT VIXEN 


Copyright ProjectVixen.com. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive

This site contains affiliate links for which we may be compensated