For those of you that sent an e-mail to me: Send either a fax number or your address and I will explain via fax or snail mail. For those of you that have posted questions about the modification: My intent was to make the basic information available, but I am not an electonics expert and it is beyond my capabilities to answer any in depth technical questions. Having said that, I do know a few things about electronics and I believe that the modification could handle two additional courtesy lights and that the timing is not adjustable. To forestall additional questions, the following is a very brief explanation: "This lamp delay module contain a cirquit board, the heart of the module is a RCA integrated cirquit, four 2-input NAND gates and a MOS FET. The cirquit operates as a one-shot, triggered when the doors are closed. The MOS FET is biased during this interval, illuminating the dome lights. The one-shot times out approximately 90 seconds later. Roger VIN 1074, (with an LDM that works. Sort of.) >>>>>>>>>>> [Non-text portions of this message have been removed]