With all this talk about the door-lock-module I thought I might drop in a question too: The Lock-Module has a connector on it with 9 pins, on the original module there are only 8 of them in use: * 2 times 2 for the solenoids (pins 6, 7, 8 & 9) * a ground (pin 5) * +12V for the electronics (pin 4) (the thick red wire is only for the solenoids) * a sense-wires for lock (pin 2) * a sense-wire for unlock and the "Lock Doors"-light (pin 3) Pin #1 is'n used or even wired on the module-side... If I remember correctly there IS a (yellow(?)) wire connected to pin 1 of my LockZilla, I'm not sure if this is connected on the cars' wiring harness too, but I was wondering what this wire could be for? Who can enlighten me? thanks in advance, JAN van de Wouw Thinking Different... Using a Mac... Living the Dream... Driving a DeLorean... #05141 "Dagger" since Sept. 2000 check out the Delorean-Files at: http://www.deloreanfiles.nl/ ------------------------------