Re: [DML] My defroster switch exploded!
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [DML] My defroster switch exploded!



There are two major causes of AC mode switch failures. Most common is the
detachment of the rubber vacuum deflector which results in partial or
non-operation of the air deflector flaps inside the air plenum.

Recently we have discovered a new problem. The rotating assembly center
shaft will crack from age and wear causing the switch to disassemble. These
controls are repairable but you may want to consider a new purchase. The
replacement switches have an additional contact that engages the AC
compressor when the defrost setting is selected; very useful for defogging.

"We're here to help you"

DMC Help / De Lorean Services / <dmchelp@xxxx>
Web Site: <www.deloreanservices.com>

----- Original Message -----
From: <RJRavalli@xxxx>
To: <dmcnews@xxxxxxxxxxx>
Sent: Tuesday, October 31, 2000 7:05 PM
Subject: Re: [DML] My defroster switch exploded!


> I don't know about a defroster switch exploding, but when I
> bought mine I found that it wasn't working...it just teeters to one
> side and doesn't "click" to go on or off. Would anyone else know
> how to fix this?
>
> Please e-mail at RJRavalli@xxxxx It's one of the many "small"
> repair issues I will be asking about in the future.
>
> RJR







Home Back to the Home of PROJECT VIXEN 


Copyright ProjectVixen.com. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive

This site contains affiliate links for which we may be compensated