Re: [DML] Power Lock Harness
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [DML] Power Lock Harness



Jim,
I had the same problem. I was told that Lockzilla would cure the
ails. However, it's not always the case. I have a bad solenoid and once
they are out of synch it's anyone's game as to what will happen. My
driver's side solenoid is toast. I've since found this out. I went with
Lockzilla for fear of my car being a brat and locking me out.

BTW, for anyone interested, I have my original control unit sitting
here looking sad as it's been replaced with Lockzilla. I know there's got
to be someone out there who would want it. Drop me a line if you're
interested.

Matthew
VIN #10365
----- Original Message -----
From: "Jim Reeve" <ultra@xxxx>
To: <dmcnews@xxxxxxxxxxx>
Sent: Sunday, August 27, 2000 4:45 PM
Subject: [DML] Power Lock Harness


> Does anybody have a diagram for the electrical harness for the door
> locks? My control unit will lock both doors, but will not unlock
> either. I know this is most likely the control unit itself, but I would
> like to test the solenoids without taking the doors apart, so I need to
> know which wires to jump on the connector from the control unit.
> Thanks.
> --
> Jim Reeve <Ultra>







Home Back to the Home of PROJECT VIXEN 


Copyright ProjectVixen.com. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive

This site contains affiliate links for which we may be compensated