RE: [DML] Alternative mirror suggestion
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: [DML] Alternative mirror suggestion



Bob and others,

I have searched but cannot find the convex mirror that I originally bought.
Like I said, it was too large and I destroyed it trying to trim it, so I
gave up.

I made a cutout of my current mirror size and went looking again. While I
don't think I found the one I used before, I did find another candidate.
It's Motormite "LOOK!" #51063. I've put a scan of it in the vault (with a
US quarter for scale):

<A HREF=" http://www.egroups.com/files/dmcnews/mirror1.jpg
">mirror1.jpg</A>

It will fit over the current mirror without modification, but barely. It
has to sit crooked, and will catch if the breakaway mirror housing is folded
with the mirror toward the car. But the visibility is sooooo much better!
I think to fit correctly it would need a cut on two sides, in which case
almost any mirror would do. There were other Motormite mirrors that were
close, but they still looked like they'd need two cuts. I still haven't
given up on finding an OEM mirror somewhere that will fit....


Gus Schlachter
Austin, TX
VIN# 4695




> -----Original Message-----
> From: Bob Brandys [mailto:oehcs@xxxx]
> Sent: Thursday, August 17, 2000 7:14 PM
> Subject: Re: [DML] Alternative mirror suggestion
>
>
> What type of Toyota was it. I would be willing to cut the mirror
> to size if it would fit.
>
>
> bob Brandys






Home Back to the Home of PROJECT VIXEN 


Copyright ProjectVixen.com. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive

This site contains affiliate links for which we may be compensated