Re: [DML] To cut or not to cut?
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [DML] To cut or not to cut?



We cut the hood on the 97? Delorean Time Machine and added the gas flap door. A good sheet metal person should be able to easilty do this. In order to prevent any initial stretching of the metal we used a die grinder to make the initial cuts.


bob

Scott Cagle wrote:

> This idea has come up numerous times before, and I think I'm going to be brave enough to try it. I have an 83, no flap. But we all know that the fiberglass underside of the hoods has the marking for the flap. The car has to go into the shop for some reconstructive surgery, so while it's there, I'm going to see about doing the fuel flap. This guy is good with stainless steel, he's proved that already. So we'll see what happens. Wish me luck!!
>
> Scott
>
> [Non-text portions of this message have been removed]
>
> Before posting messages or replies, see the posting policy rules at:
> www.dmcnews.com/Admin/rules.html
>
> To address comments privately to the moderating team, please address:
> moderator@xxxx






Home Back to the Home of PROJECT VIXEN 


Copyright ProjectVixen.com. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive

This site contains affiliate links for which we may be compensated