Re: [DML] Window Motor
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [DML] Window Motor



Richard,
Some years ago I had a similar failure. I removed the window lift assembly
and repaired it by forming "bandage/splints" on the broken elbow. This was
achieved by wrapping small patches of fiberglass/epoxy over the broken
sections. That was twelve years ago and things are still working
flawlessly. Not super pretty but effective. I even did the other side as
preventative medicine.

Hope this helps,
Don
----- Original Message -----
From: "Richard Strecker" <dmc1219@xxxx>
To: "DMC" <dmcnews@xxxxxxxxxxx>
Sent: Tuesday, August 01, 2000 7:03 PM
Subject: [DML] Window Motor


> Most problems with the window lift mechanism seem to be the motors &
> gears, mine is the nylon(?) elbow that connects the mounting frame and
> the cable guide tube. I would like to know if anyone has a passenger
> side unit that they are about to trash and the elbow is still intact.
> If so, please contact me.
>
> Thanks,
>
> Richard
> Vin 2320
>
>
> [Non-text portions of this message have been removed]
>
>
>
> Before posting messages or replies, see the posting policy rules at:
> www.dmcnews.com/Admin/rules.html
>
> To address comments privately to the moderating team, please address:
> moderator@xxxx
>
>






Home Back to the Home of PROJECT VIXEN 


Copyright ProjectVixen.com. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive

This site contains affiliate links for which we may be compensated