Erik, Get yourself a quart of 3M general Adhesive Cleaner and Remover part # 08984 available at most auto parts stores. It will remove the residue from your stainless. You will also need this stuff if and when you replace the outer door seals also. Bill Lane vin #3635 Jake wrote: > Erik, > > I couldn't say what it does to stainless (I would assume, nothing), but > rubbing alcohol and especially nail polish remover have been very useful to > me in removing adhesive marks. > > Good luck, > > Jake > > ----- Original Message ----- > From: "Erik Geerdink" <delorean502@xxxx> > To: <dmcnews@xxxxxxxxxxx> > Sent: Saturday, July 29, 2000 1:27 AM > Subject: [DML] adhesive mark removal > > > I have two adheasive marks on a left quarter panel I have (for > > sale). It looks like they have been there awhile. I tried using > > gas, but that didn't take it out (i didn't try to hard either). > > Should I try using gas again, or is there another product out there > > that will work better? > > Thanks > > > > Erik Geerdink > > Before posting messages or replies, see the posting policy rules at: > www.dmcnews.com/Admin/rules.html > > To address comments privately to the moderating team, please address: > moderator@xxxx