Re: [DML] RTV sealant/Fuel pump
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [DML] RTV sealant/Fuel pump



Instead of trying to seal up the boot, I think you should check your tubbing
fittings, one has to be leaking for gas to be getting on the top side of
your pump.
But then again, I could be wrong...sure would not be the first time!
Bob
5947

----- Original Message -----
From: Cliff Andrews <fen2k@xxxx>
To: <dmcnews@xxxxxxxxxxx>
Sent: Friday, July 28, 2000 12:15 AM
Subject: [DML] RTV sealant/Fuel pump


> Hi everyone.. i just recently replaced my fuel pump
> assembley (everything).. and damnit i still get some
> gas smell coming in... i checked the area tonight and
> saw that gas was filling up inside of the boot and
> surrounding the pump and contacts.. i had this problem
> before and it kind of unnerves me to think of gas and
> electrical connections in contact.. so my question:
>
> Will RTV sealant hold up submerged in gas?
>
> I want to seal up the boot so no gas can get in :)
>
> Cliff Andrews
> Centreville, VA
> 10854
>
> __________________________________________________
> Do You Yahoo!?
> Kick off your party with Yahoo! Invites.
> http://invites.yahoo.com/
>
>
> Before posting messages or replies, see the posting policy rules at:
> www.dmcnews.com/Admin/rules.html
>
> To address comments privately to the moderating team, please address:
> moderator@xxxx
>
>






Home Back to the Home of PROJECT VIXEN 


Copyright ProjectVixen.com. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive

This site contains affiliate links for which we may be compensated