Erik, Referring to 8/7/1 remove the window support bracket #4. Remove the two 10mm bolts that attach the cable drive to the glass carrier bracket. Pull the glass up until the carrier bracket nylon track runners make contact with the stainless steel inner door section. Carefully bend the stainless inner door section lip enough to allow the track runners to clear the stainless lip. Pull the glass up and out of the door. When replacing the glass be aware that there are nubs located on the inside of the nylon track runners that will interfere with replacement of the runners onto the track. With the use of a small screwdriver align the front and rear track as to bypass the nubs. "We're here to help you" DMC Help / De Lorean Services / <dmchelp@xxxx> Web Site: <www.deloreanservices.com> ----- Original Message ----- From: Erik Geerdink To: dmcnews@xxxxxxxxxxx Sent: Thursday, July 27, 2000 11:24 AM Subject: [DML] toll booth window I'm having a problem getting a tollbooth window out. Its the passenger side and I can't figure out what bolts to take off. I have the interior panels off and I can see all the inner workings. I'm sure it's a simple process, but if someone could show me the ways, I'd appreciate it. Thanks! Erik Geerdink [Non-text portions of this message have been removed]