I some posted door lock troubleshooting info a couple of months ago... http://www.egroups.com/message/dmcnews/8261?&start=8236 Basically, you need to determine if the problem is with the wiring through the doors, the solenoids/switches, or the lock module. There's about a 90% probability that it's the module. Good luck, Gus Schlachter Austin, TX VIN# 4695 > -----Original Message----- > From: Delorean17@xxxx [mailto:Delorean17@xxxx] > Sent: Friday, June 23, 2000 10:34 AM > To: dmcnews@xxxxxxxxxxx > Subject: [DML] door locks > > > Hello List, > Since I have owned the car the power locks have not worked. I have > checked everything out. I cleaned all the connections under the > T-panel and > tested the wires from the t panel connection to the solenoids.