Re: [DML] NO 3rd or 4th fan speed
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [DML] NO 3rd or 4th fan speed



I HAVE HAD THE SAME PROBLEM.
WHILST I HAVE NOT YET FINALLY ISOLATED THE EXACT AREA , IF YOU MOVE THE
WIRES TO THE DRIVERS SIDE OF THE HEATER MOTOR, THE 3rd STAGE FAN SPEED
WORKS. SO I WOULD IMAGINE IT IS A BROKEN WIRE OR A BAD CONNECTION.
----- Original Message -----
From: <Delorean17@xxxx>
To: <dmcnews@xxxxxxxxxxx>
Sent: 21 May 2000 23:39
Subject: [DML] NO 3rd or 4th fan speed


> Hello,
> For some reason the heater fan will only work on the 1st and 2nd
speeds.
> I hear the relay click when I go to the 3rd speed but I get no fan
movement.
snip..........snip
> Before posting messages or replies, see the posting policy rules at:
> www.dmcnews.com/Admin/rules.html
>
> To address comments privately to the moderating team, please address:
> moderator@xxxx
>





Home Back to the Home of PROJECT VIXEN 


Copyright ProjectVixen.com. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive

This site contains affiliate links for which we may be compensated