door hinge raising
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

door hinge raising



Hello,
My Jul 81 DeLorean had a large dent in the door so I bought a perfect 
used one for it that came off off an 82 or 83 De Lorean. I dont have the 
T-panel on my car right now because the door is too close to the fiberglass 
roof. The top of the new door hits the fiberglass roof panel very hard and 
makes a nasty noise when the door goes up. There is no way I can put the 
T-panel back on because the door would smash it when it went up.
I moved the four bolts connecting the doors to the hinges down and that 
is still not even close to high enough. The stainless actually bows in when 
its up so I leave it closed now. The manual says I am going to have to add 
shims under the hinge mount. Looks like the torsion bar has to come out just 
after I got it in:( does anyone know what DeLorean supplier has these shims? 


Thanks
Dave
#2496
by the way. I got $0.14 per pound from the junk yard for the smashed SS door.




Home Back to the Home of PROJECT VIXEN 


Copyright ProjectVixen.com. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive

This site contains affiliate links for which we may be compensated