[DML] Change in trailing arm design?
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[DML] Change in trailing arm design?



Hey List,

I just realized something and I wanted to run it past the DML to see what 
you all think. I just took off the last of the rear suspension yesterday and 
when I was looking at the trailing arms, I noticed that the little piece of 
metal that is welded to the trailing arm that connects the flexible brake 
line to the brake hose that then goes to the rear calipers is located in a 
different place than the trailing arms that are in the 24 page catalog (the 
catalog with vinyl cover and side view of car on both sides of catalog). The picture I am referring to in the catalog is the overhead view of 
the complete De Lorean frame. In the production De Loreans, that piece of 
metal is welded to the inside of the trailing arm, but in that picture of the 
overview its located on the top of the trailing arm. I am wondering if it 
was a design change, what was the reason for the change?

Later,
Nick
VIN# 1852
HTTP://members.aol.com/njp548




Home Back to the Home of PROJECT VIXEN 


Copyright ProjectVixen.com. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive

This site contains affiliate links for which we may be compensated