[DML] Re: speedo, angle drive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[DML] Re: speedo, angle drive



Greg,

The DeLorean speedometer should rise and fall with no jerkiness. Check to be
sure that the angle drive cable fits snugly into the dust shield (parts
manual 5/1/0 fig 9) Also insure that the dust shield is fitted snugly to the
hub assembly.

DMC Joe / De Lorean Services / <dmcjoe@xxxx>

Web Site: <www.deloreanservices.com>
----- Original Message -----
From: Greg Bell <gbell@xxxx>
To: <dmcnews@xxxxxxxxxxx>
Sent: Monday, March 06, 2000 1:01 PM
Subject: [DML] speedo, angle drive


> My speedometer was on the blink when I got my car so I've never seen a
> well maintained one operate. I just replaced the angle drive this weekend
> and that did the trick but I wanted to ask other owners about its traits.
> The needle jumps around a lot at low speeds and seems to settle down and
> stabilize as the speed climbs. Is this normal or should the needle be
> smooth all the way from 0 to 55mph?? It usually smoothes out at around
35 -
> 40 mph, but is a little jerky on it's travel to that speed. Is this
normal?
>
> Also, what type of lube should I use for the angle drive and lower
cable??
>
> Thank you in advance
>
> GB
> #10054






Home Back to the Home of PROJECT VIXEN 


Copyright ProjectVixen.com. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive

This site contains affiliate links for which we may be compensated