Try removing the top front section of the intake manifold and clean the throttle plates with carb spray and apply lubricant to the pivot points. DMC Joe / De Lorean Services / <dmcjoe@xxxx> Web Site: <www.deloreanservices.com> ----- Original Message ----- From: <Deloreanernst@xxxx> To: <dmcnews@xxxxxxxxxxx> Sent: Monday, February 28, 2000 9:19 PM Subject: [DML] Re: high rpm idling > In a message dated 2/23/00 2:20:04 AM Eastern Standard Time, > Deloreanernst@xxxx writes: > > << When in neutral, my 5 speed idles very high, >> > > I tried lubricating both the ends of the cable while moving it in and out, as > well as the linkage at the pedal, and all the geegaws back to and including > the microswitch, which has a nice on-off click as the pedal is worked. It > seems to work real smoothly. I used white lithiuim spray grease. But no > improvement. Could it be something else, like the idler motor? Mine looks, > on the outside at least, like it spent the last 18 years underwater with the > body dies off of Ireland. > > -Wayne A. Ernst > "Living the dream!" > VIN...11174