[DML] Irritating cold start problem
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[DML] Irritating cold start problem



Ok, this has been a thorn in my side long enough, and I'm out of answers. 
When I crank my car, if it's been sitting for longer than an hour, it has a 
VERY BAD hesitation. It never stalls, but it comes as close as it can. 
After it makes it to about third gear, it's fine, no more hesitations. 
When I first got it, it wouldn't even start because of a faulty warm up 
regulator, which I replaced with one from Grady. While I was at it, I also 
replaced the thermo time switch and the cold start valve, just for peace of 
mind. What else could I be overlooking? I just had the fuel mix readjusted 
too, so it's right. I'm completely lost here. Any help as always is much 
appreciated!!

Scott




Home Back to the Home of PROJECT VIXEN 


Copyright ProjectVixen.com. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive

This site contains affiliate links for which we may be compensated