[DML] Re: Splash guard help
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[DML] Re: Splash guard help



This is pretty common. Go ahead and cut or grind them off. You can get to
them from the top. PJ Grady has Stainless Steel replacements for this.

While you're in there be sure to check the suspension bolts holding the arm
on.

Mark N
VIN 6820

At 09:51 PM 2/15/00 EST, Delorean17@xxxx wrote:
>Hello,
> I tried to remove the drivers side splash guard to get at the fuel 
>filter. The nuts looked rusty so I sprayed them with liquid wrench. the 
>first came off fine but the other 2 wont. the entire bolt and nut both
spin. 
> It doesnt look like you can get at it from the top. what should I do? take 
>the dremel and cut the nut off? but how will I replace the guard? I want
to 
>do the ASAP. help!
>
>Thank you
>
>David
>#2496-kinda runs




Home Back to the Home of PROJECT VIXEN 


Copyright ProjectVixen.com. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive

This site contains affiliate links for which we may be compensated