[DML] Re: Facia
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[DML] Re: Facia



Hi Tom,
Check the archives on this. I seem to remember someones web page that had
these instructions in it. I'll say this, the front is more difficult to
remove than the rear. If I remember right a 10mm socket, 1/4" rachet and a
couple of 1/4" extensions take about 98% of the hardware off. If you are
going to remove the front facia you may want to replace your headlamps at
the same time while the facia is off.

Dave Sontos
VIN 02573

----- Original Message -----
From: Tom Watkins <watbmv@xxxx>
To: <dmcnews@xxxxxxxxxxx>
Sent: Monday, February 14, 2000 3:36 PM
Subject: [DML] Re: Facia


> I'm in need of removing my front fascia to have the eyebrows removed
> and would be interested in a more detailed description of the removal
> process. I have read in other posts that the manual leaves some detail
> out....I also need to remove my passenger side front fender so I can
> send it in to have a small ding taken out. I'm the kind who needs a
> step by step thing so I don't screw up






Home Back to the Home of PROJECT VIXEN 


Copyright ProjectVixen.com. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive

This site contains affiliate links for which we may be compensated