[DML] Re: Rebuilding fascias
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[DML] Re: Rebuilding fascias



use sherwin williams bc/cc system, with ALOT of flex agent. (4:1 in the
clear coat) I have put fiberglass replacements on a couple of vette's I have
rebuilt... they look better, but even minor parking lot bumps leave them
destroyed
----- Original Message -----
From: "Matthias" <matthias@xxxx>
To: <dmcnews@xxxxxxxxxxx>
Sent: Saturday, February 12, 2000 12:53 PM
Subject: [DML] Rebuilding fascias


> Somebody asked if there are any fascia rebuilds out there.
>
> It's an idea that makes much sense, because the current fascias not only
> sag, but they are also so dried out, that new aint won't stick that well
> on them anymore. I know from experience :-(.
>
> I guess that there is a safety issue though. Imagine getting sued by
> that pedestrian who gets all the fibreglass into his spine on a
> collision!
>
> Matt
>
> ------------------------------------------------------------------------
> Before posting messages or replies, see the posting policy rules at:
> www.dmcnews.com/Admin/rules.html
>
> To address comments privately to the moderating team, please address:
> moderator@xxxx
>
> ------------------------------------------------------------------------
> -- Create a poll/survey for your group!
> -- http://www.egroups.com/vote?listname=dmcnews&m=1
>
>
>





Home Back to the Home of PROJECT VIXEN 


Copyright ProjectVixen.com. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive

This site contains affiliate links for which we may be compensated