[DML] Vortec 4.3 engine swap update
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[DML] Vortec 4.3 engine swap update



Well last night I installed the new transmission for the swap. Everything
went very smoothly and the job took about 1 hour. (15 minutes of that was
jacking the car up on all 4's; I put the car on wheel blocks) I ordered a
belhousing gasket from Rob Grady yesterday and this will be the next step.
Once the gasket gets here, I'll go ahead and put that on with the newly
fabricated belhousing. Hopefully, (if the weather is nice) next weekend I'll
be ready to put the engine in place to be measured for the mounts and tackle
the problem with the oil pan. I took pics and once I get them developed,
I'll post them on my site.


Thanks,


Duke
www.geocities.com/at88mph_1999






Home Back to the Home of PROJECT VIXEN 


Copyright ProjectVixen.com. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive

This site contains affiliate links for which we may be compensated