[DML] Re: Reverse Lights

["Duke Bladorn" <at88mph@xxxx>]

Scott,


The reason the lights are on in reverse is b/c of the computer governor.
Just jack up the car and on the passenger side where the computer governor
plugs into the pan, there are 2 bolts and a clip. It could be a *slight*
adjustment or the bolts could be loose. Have someone watching the reverse
lights (just turn the key on, it dosen't need to be running) Push in on the
connector and if the reverse lights go out, just tighten up the bolts. If
they don't go out, *slightly* move the connector to the left or right until
they go out and tighten the bolts up.


Hope this helps,


Duke




----- Original Message -----
From: <DMC83in99@xxxx>
To: <dmcnews@xxxxxxxxxxx>
Sent: Sunday, February 06, 2000 9:10 PM
Subject: [DML] Reverse Lights


> Ok list, this is probably something so simple I'm going to kick myself
over
> it, but I'm going to ask anyway. I have no clue how long it's been doing
> this, but I noticed today when I started the car that the reverse lights
are
> on. They go off in drive, 1, and 2, but they're on in Park, Reverse and
> Neutral. Any ideas?
>
> Scott
> #16738
>
> ------------------------------------------------------------------------
> Before posting messages or replies, see the posting policy rules at:
> www.dmcnews.com/Admin/rules.html
>
> To address comments privately to the moderating team, please address:
> moderator@xxxx
>
> ------------------------------------------------------------------------
> -- Easily schedule meetings and events using the group calendar!
> -- http://www.egroups.com/cal?listname=dmcnews&m=1
>
>