[DML] Re: Diagnostic Socket Reading Device

["DMC Joe" <dmcjoe@xxxx>]

Stian,
Good suggestion, the problem is the socket is only partially wired. The only
usable connection to the plug is for TDC pick up. This is easily
accomplished with the use of a standard timing light.

Just like the mirror heaters and hot star relay, this is another item that
was conceived on the drawing board but never made it to production.

DMC Joe / De Lorean Services / <dmcjoe@xxxx>

Web Site: <http://www.deloreanservices.com>
----- Original Message -----
From: Stian Birkeland <dmc_norway@xxxx>
To: <dmcnews@xxxxxxxxxxx>
Sent: Saturday, February 05, 2000 6:37 AM
Subject: [DML] Diagnostic Socket Reading Device


>
> If DMC didn't develop a diagnostic socket reading device, then maybe there
> is someone out there who are able to make such a device. Would help us
> owners alot. We could bring that device to our local garage and fine-tune
> the engine 100%. I also think such a device would be cost-saving in the
long
> run. Your mechanic would use less time finding out what needed to be
> adjusted.
>
> I would guess that the DMCL factory (and perhaps the QAC's) must have had
> such a device reading the engine's stats before shipping the cars off to
> customers. Where are they now?
>
> DMC Joe? Rob Grady? James?
> These 3 names come to mind when I think of DeLorean electric system.
> Would a reading device for the diagnostic socket be costly to produce?
>
> Best wishes
> Stian Birkeland
> NORWAY