Your problem is not the door; it is the T panel. When you car was assembled at the factory two large foam strips were installed between the roof support and T panel to help support the T panel. Over the years the foam strips have rotted allowing the panel to drop causing the door edge to contact the panel when it is in the full open position. The strips are not listed in the parts manual, we use 1/2 inch rubber weather stripping available from most hardware stores. If you need more information on this subject you may contact us directly. DMC Joe / De Lorean Services / <dmcjoe@xxxx> Web Site: <http://www.deloreanservices.com> ----- Original Message ----- From: jim sawyer <mrvideosawyer@xxxx> To: <dmcnews@xxxxxxxxxxx> Sent: Sunday, January 16, 2000 12:06 PM Subject: [DML] Doors hitting T-Panel > I would like to know if any one has this problem and maybe a fix. When > the doors on my D open full the T-Panel is hit by the door at the > radius. When the door is shut the lines are even. I do not want to > move doors as this would effect the latching of door. The car has > never been hit and I have aske other owners about this and they do not > have a solution. HELP I want to fix before this becomes a problem. > One owner told me his T-Panel cracked with same prob. > > Jim and Cindy Sawyer vinn4149 > > > ------------------------------------------------------------------------ > Before posting messages or replies, see the posting policy rules at: > www.dmcnews.com/Admin/rules.html > > To address comments privately to the moderating team, please address: > moderator@xxxx > > ------------------------------------------------------------------------ > > eGroups.com home: http://www.egroups.com/group/dmcnews > http://www.egroups.com - Simplifying group communications > > > > >