[DML] Re: Paint question
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[DML] Re: Paint question



That stud finder will not work. It doesn't look for nails or anything in
that matter. It looks for spaces behind a wall. If there is a space it
doesn't do anything, then when you move it over something (stud) it starts
to beep. I don't think it will work on stainless panels. I would start by
removing the panels. That way you could see what they look like from the
other side. If you see any imperfections or holes you can be almost certain
that there is bondo under the paint.
Just a thought

Tom Niemczewski
tomcio@xxxx
vin 6298

----- Original Message -----
From: <Mike03062@xxxx>
To: <dmcnews@xxxxxxxxxxx>
Sent: Monday, December 27, 1999 3:31 AM
Subject: [DML] Re: Paint question


> Schaeffer Since the "D" is high Carbon steel (Stainless) The Old Magnet
> trick won't work in checking out Bondo under the paint. I was Just
> wondering if that stud finder sold at Home Depot would work?? Doesn't it
> look for nails in the wall or am I way off base here???
>
> Mike in NH
>
> ------------------------------------------------------------------------
> Before posting messages or replies, see the posting policy rules at:
> www.dmcnews.com/Admin/rules.html
>
> To address comments privately to the moderating team, please address:
> moderator@xxxx
>
> ------------------------------------------------------------------------
> -- Create a poll/survey for your group!
> -- http://www.egroups.com/vote?listname=dmcnews&m=1
>
>
>





Home Back to the Home of PROJECT VIXEN 


Copyright ProjectVixen.com. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive

This site contains affiliate links for which we may be compensated