[DML] Re: Service with a Frown
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[DML] Re: Service with a Frown



Instead of grinding a 3/8" exctension to a 5/16" I just bought a 3/8" to
5/16" adapter from snap-on. Fits on to your standard 3/8" ratchet and is
5/16" on the end.
-SweatyEddy

----- Original Message -----
From: <SAND131@xxxx>
To: <dmcnews@xxxxxxxxxxx>
Sent: Saturday, November 27, 1999 5:39 PM
Subject: [DML] Re: Service with a Frown


> In a message dated 11/27/99 10:20:43 AM Central Standard Time,
> DTrue10521@xxxx writes:
>
> << I believe you can make your own wrench to remove the oil plug from a
> length
> of 5/16 square stock. It worked real well for me. >>
> That will work or you can take a 3/8" short socket extension and grind it
> down to 5/16" But my choice is to find the local Snap On dealer and have
him
> sell you Part #PPM 410 3/8" drive 5/16" Square male adapter.
> Ralph Vin 1606
>
> ------------------------------------------------------------------------
> Before posting messages or replies, see the posting policy rules at:
> www.dmcnews.com/Admin/rules.html
>
> To address comments privately to the moderating team, please address:
> moderator@xxxx
>
> ------------------------------------------------------------------------
> -- Easily schedule meetings and events using the group calendar!
> -- http://www.egroups.com/cal?listname=dmcnews&m=1
>
>
>





Home Back to the Home of PROJECT VIXEN 


Copyright ProjectVixen.com. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive

This site contains affiliate links for which we may be compensated