Kayo, There are two plunger switches on the driver door frame, one controls the door and interior courtesy lights. The other switch controls the key buzzer & seat belt warning light. To test the door light switch do the following. Access the area behind the switches and locate the purple/blue & purple/white wires and unplug them from the adjoining plunger switch. Jump the two wires, if the lights in the door illuminate you have a defective plunger switch. DMC Joe / DeLorean Services / <dmcjoe@xxxx> Web Site: <http://www.deloreanservices.com> ---------- > From: KayoOng@xxxx > > Does any one have an answer? > > Last week, I had the driver's (left) side door open and the passenger (right) > side door was closed. All of the sudden the lights on the driver's door and > the interior lights all went out. I walked around to the passenger's side > and opened the door and the lights on the door and the interior all came on. > > The passenger's side is still working properly when the door is open but not > the driver's side. > > The buzzer and seat belt warning lights on the dash board does not work > either when this all happened. Is there a relay or some electric unit or > wiring that needs to be repaired or replaced? > > Kayo Ong > #05508 > Lic 9D NY > > ------------------------------------------------------------------------ > Before posting messages or replies, see the posting policy rules at: > www.dmcnews.com/Admin/rules.html > > To address comments privately to the moderating team, please address: > moderator@xxxx > > -- Create a poll/survey for your group! > -- http://www.egroups.com/vote?listname=dmcnews&m=1 >