[DML] Re: DeLorean Vendors Use of Stainless Screws?
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[DML] Re: DeLorean Vendors Use of Stainless Screws?



In some cases, stainless steel is not the correct material for
a fastener. Stainless can't easily be painted, which means
any application that requires a black finish is difficult to achieve.
Stainless is brittle compared to other materials, which means
that any structural fastener or one that is subjected to vibration
should not be stainless. Also, stainless hardware is not
all that cheap, particularly if you are worried about rust. Some
lower cost grades of stainless will corrode eventually.

If you are interested in getting stainless fasteners for your car,
have a look at McMaster-Carr at http://www.mcmaster.com

Michael A. Griese
Storage Software Development Manager
IBM Storage Systems Division
Rochester, MN 55901
Internet: magriese@xxxx
voice: (507)253-1853
fax: (507)253-2880






Home Back to the Home of PROJECT VIXEN 


Copyright ProjectVixen.com. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive

This site contains affiliate links for which we may be compensated