[DML] Re: Misfire after cold start.
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[DML] Re: Misfire after cold start.



Check to be sure that the electrical and vacuum hose connections at the
warm up regulator are correct and working.

DMC Joe / DeLorean Services / <dmcjoe@xxxx>
Web Site: <http://www.deloreanservices.com>

----------
From: Graham Wells <gwells@xxxx>

Apart from one occasion when there was a real reluctance to start when
cold, starting has mostly been OK. However, until the engine has run for 2
or 3 minutes, there is a misfire problem on any load or acceleration which
seems to me, as a novice to fuel injection, to be similar to over use of
the choke on a carburettor based engine. I feel sure it is an excess of 
fuel causing the problem, but it does appear to go away after a few
minutes. I have checked the cold start injector which does not appear to be
leaking excess fuel into the system. Does anyone have any other ideas?



Graham gwells@xxxx
VIN 17152






Home Back to the Home of PROJECT VIXEN 


Copyright ProjectVixen.com. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive

This site contains affiliate links for which we may be compensated