[DML] Starting problem at in-between temps
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[DML] Starting problem at in-between temps



Hi,

I've got a couple of ideas on this, but wanted to get more input in
case I forgot something obvious.

This past weekend my DeLorean wouldn't start when the engine was warm,
but cooler than normal operating temp. Cold start is fine. Hot start is
fine. It only showed up if I left the car sit for a while and the
engine temp dropped to around 100 degrees or so. Then, no start. Let it
cool down another 1/2 hour and it started just fine. Drive down the
road. Stop at a rest area for 5 minutes. Engine is still warm when I
get back and it starts fine.

It did this to me twice. If it had a carburetor instead of FI, I'd say
the choke was adjusted wrong. I'm thinking the thermo-time switch could
be going bad? Not completely bad or it wouldn't cold-start properly,
but maybe lost it's calibration?

Any suggestions appreciated!

Mark N
VIN 6820





Home Back to the Home of PROJECT VIXEN 


Copyright ProjectVixen.com. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive

This site contains affiliate links for which we may be compensated