It wouldn't be hard at all to pull molds from the DeLorean body panels. The problem is making panels that would fit. The hood wouldn't be much of a problem because you can replace the whole thing. The rest of the stainless skin on a DeLorean is very thin - fibreglass panels the same thickness would be too fragile. The first bump would fracture them. If you made them thick enough they wouldn't fit properly. Plus - you still have to have stainless doors. Mike Griese Storage Software Development Manager IBM Storage Systems Division Rochester, MN 55901 Internet: magriese@xxxx voice: (507)253-1853 fax: (507)253-2880