[DML] Re: Gas Mask
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[DML] Re: Gas Mask



In a message dated 9/17/99 8:07:05 PM Eastern Daylight Time, DMCJOE@xxxx 
writes:

<< There are no hollow voids in the front GRP (pontoon) body section. There
are, however, >>

There are hollow voids in the front pontoon body,they run the length of the 
fenders both sides,on the drivers side the wiring harness for the headlights, 
radiator fans,ect run thru the hollow area,on the passenger side it is just 
hollow unfortunately the top of the fender covers the area that is hollow it 
is about two inches high about 1 1/2 wide DO NOT CUT the inside of the trunk 
(The areas where the struts bolts on to)that only abutts the inner fender 
panel there is no void there,there is also a smaller hollow which is the lip 
that surrounds the complete trunk area(it keeps rain water that passes the 
trunk seal from getting into the trunk) there is no way to remove anything 
that got in there,and structurally you would damage the pontoon.

Claude
Vin#000570




Home Back to the Home of PROJECT VIXEN 


Copyright ProjectVixen.com. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive

This site contains affiliate links for which we may be compensated