[DML] Re: Turbo and Audio
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[DML] Re: Turbo and Audio



In a message dated 9/13/99 4:51:43 PM Central Daylight Time, 
malevy@xxxx writes:

<< The DeLorean dash board has a metal plate that is cut for a older style
shaft radio. (Part # 106639, Page 7-3-0)

There on not many of them left, so when you find them they are
expensive. >>

Marc,

This is another item a couple of us have been working on for a little 
while and we just about have it finished. When complete, we will be able to 
offer a complete replacement panel made to either replace the original to fit 
the stock radio, or a custom panel cut out to fit whatever radio face you 
want. The vents and controls will fit this new panel the same as stock. 
(Note, this custom panel is still limited to YOU making sure the radio you 
choose will fit in the space available ) All you will have to do is send us a 
cutout diagram for the radio you are going to use and we will fabricate a 
complete panel assembly to fit. This way you will be able to save your 
"original" panel for later replacement if you want to go back with the stock 
radio.
We are working on having these panel assemblies ready in time for the DOA 
Expo. Cost is going to be in the $100 to $150 range. If anyone has any 
interest, please e-mail me directly.

Thanks, Marty




Home Back to the Home of PROJECT VIXEN 


Copyright ProjectVixen.com. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive

This site contains affiliate links for which we may be compensated