Bob, The counter weights are on the backside of the pressure plate, there is several inches of clearance between the back of the pressure plate and the bell housing, I don't understand your clearance problem. It is possible you tried to install a Centerforce disc. Centerforce does not make a disc (clutch plate) that fits the DeLorean. DMC Joe / DeLorean Services / <dmcjoe@xxxx> Web Site: <http://www.deloreanservices.com> ---------- > From: Robert Brandys <oehcs@xxxx> > To: dmcnews@xxxxxxxxxxx > Subject: [DML] Re: Centerforce Clutches > Date: Wednesday, July 21, 1999 12:36 PM > > I would not recommended a center force clutch for a D. I bought one > years ago when my stock clutch died. After installing it PROPERLY, the > counter weight would not clear the pressure plate. I eventually had to > remove them. Go with a stock clutch pack. > > Dr. Bob > > ------------------------------------------------------------------------ > To address comments privately to the moderating team, please address moderator@xxxx > ------------------------------------------------------------------------ To address comments privately to the moderating team, please address moderator@xxxx