Ok I have run out of ideas on this one... I recently put in a new steering rack and lower U joint to take care of a sloppy steering problem. Ever since then the steering seems to bind up and get stuck going around. I've disconnected the joints from the rack and find the rack to be tight with no binding so I know it must be somewhere in the joints. To try to solve the problem I replaced the bushing at the firewall thinking that would solve the problem but no luck. I have soaked the joints in oil to make sure neither are stiff. Steering column itself seems to be binding free. Any ideas?? Raymond McKay Network Administrator Funnybone Interactive ------------------------------------------------------------------------ To address comments privately to the moderating team, please address moderator@xxxx