[DML] Re: SS clutch cable

[magriese@xxxx]

Erik - The DeLorean clutch is stiff. The stainless hose won't change that.
Replacing the hose is not that difficult. It requires grubbing around under the
car and messing with brake fluid. You will need to bleed the clutch after the
hose has been replaced. You can route the new hose along the same
path as the old hose.

Mike Griese
Storage Software Development Manager
IBM Storage Systems Division
Rochester, MN 55901
Internet: magriese@xxxx
voice: (507)253-1853
fax: (507)253-2880



delorean502@xxxx on 07/06/99 07:57:49 AM

Please respond to dmcnews@xxxxxxxxxxx

To: dmcnews@xxxxxxxxxxx
cc: (bcc: Mike Griese/Rochester/IBM)
Subject: [DML] SS clutch cable





how difficult is it to install a SS clutch cable? is it possible to do
it myself, or should i have a pro do it? if a pro needs to do it, do
you think the local mechanic is able to do this? my clutch is stiff
and it is hard to shift into gears sometimes. i thought it was the
fluid until the last "clutch" posting. thanks for the help

erik geerdink
VIN 4512
PLATE EGGS D


------------------------------------------------------------------------
Don't let the next virus knock you out! Special Offer to eGroups members
Install @Backup by June 30th and win a $100 Gift Certificate from Amazon
.com and @Backup free for a year! http://clickhere.egroups.com/click/363

To address comments privately to the moderating team, please address to
moderator@xxxx






------------------------------------------------------------------------
To address comments privately to the moderating team, please address to moderator@xxxx