[DML] Intermittent Electronics
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[DML] Intermittent Electronics



Re various electronic problems we have with our D's,  I have worked with electronics all my life and have found that I can fix about 95 per cent of the problems by resoldering a PC Board that might be in question.   I don't know if this would work
with the tail light boards or not as I have never looked at mine.   So much of the time the little wire going thru the hole has come unsoldered,or has a high resistance connection, although it LOOKS perfectly okay.  I just touch a fine tipped solder iron lightly to that spot until the solder remelts again and the wire is reheated too, but not enough to burn anything.
 
Murray
Vin:05962 Lic:DMC-XII  

eGroups.com home: http://www.egroups.com/group/dmcnews
www.egroups.com - Simplifying group communications


Home Back to the Home of PROJECT VIXEN 


Copyright ProjectVixen.com. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive

This site contains affiliate links for which we may be compensated