hi there is a small stud with a rubber cap directly over the blower .this is used for a stop for the hood this is where the water enters. remove -and seal this should fix the problem questions call bob 919 383 6187 thanx bob riginal Message----- From: William F. Lane <blane@xxxx> To: Delorean News group <dmcnews@xxxx m> Date: Sunday, June 20, 1999 10:46 PM Subject: [DML] A/C Blower Motor > Just replaced my blower motor for the third time. This time the motor >had frozen from rust. Can anyone tell me what to do to keep water out >of the motor. The cowl drain was cleaned out but it was not stopped up >enough to cause water to divert to another route. > >Thanks, > >Bill Lane >blane@xxxx >vin 3635 > > >------------------------------------------------------------------------ >eGroups Spotlight: >"Lightning Strike Survivor List" - on-line support group for lightning strike >survivors and their families. http://clickhere.egroups.com/click/111 > > >eGroups.com home: http://www.egroups.com/group/dmcnews >http://www.egroups.com - Simplifying group communications > > > > ------------------------------------------------------------------------ eGroups.com home: http://www.egroups.com/group/dmcnews http://www.egroups.com - Simplifying group communications