[DML] Gear change
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[DML] Gear change



I had quite the same problem. My gearstick was broken at the pin. The
problem is that there is not enough material around the pinhole. After
years (14 in my case) of pulling the gearstick the materiel lenghten
itself and in the worst (my) case it is broken. In this oval hole no pin
can be fixed. Somebody remanufactured me a new stick in a higher steel
quality I drill the right hole and bend it in the right possition. It
works perfect until today.

Thilo Skursch
Flensburg, Germany


------------------------------------------------------------------------

eGroups.com home: http://www.egroups.com/group/dmcnews
http://www.egroups.com - Simplifying group communications







Home Back to the Home of PROJECT VIXEN 


Copyright ProjectVixen.com. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive

This site contains affiliate links for which we may be compensated