Many thanks to DMC Joe and Harold for their tips regarding my lighting problems-turns out they were both right on the money as I had a loose connection at the #2 fuse which was easily fixed and they're back working now. John at Special T just serviced my rear light circuit boards and did a great job but one of my connectors from the wiring harness to the board isn't in the best of shape and tends to flicker out every now and then. Is it possible to get a replacement connector and splice it in or would the wiring harness need to be replaced as a whole? My only other lighting issue now is still getting the reverse lights to work since even after replacing the switch on the transmission and servicing the circuit boards I'm still getting nothing when in reverse. Quite frustrating since this one problem is preventing me from passing a Virginia State Inspection. As always any thoughts on troubleshooting this would be appreciated! Thanks again and Seasons Greetings to all, Mike [Non-text portions of this message have been removed] To address comments privately to the moderating team, please address: moderators@xxxxxxxxxxx For more info on the list, tech articles, cars for sale see www.dmcnews.com To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/dmcnews/ <*> To unsubscribe from this group, send an email to: dmcnews-unsubscribe@xxxxxxxxxxxxxxx <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/