WD-40 is fine. It is just that it will leave the surface oily which will attract a lot of dust and dirt. I use alcohol and Windex. They leave the surface dryer and with no residue. I save the expensive 3M stuff for special occasions or if I regrain. The WD-40 is probably not great to use on the rubber seals so stay away from the door seals with it.It is also messy on glass. Spray it on a rag and then wipe the car with it instead of spraying directly on the S/S. It is VERY good for the power antennae but again spray it on a rag and then wipe the antennae mast. Stay away from the rub strip with the Goo-Gone. It can loosen the glue holding the rubber on. David Teitelbaum vin 10757 --- In dmcnews@xxxxxxxxxxxxxxx, ComposerZelgadis@xxxx wrote: > > I'll be perfectly honest, I have very little knowledge of stainless steel in > general (i.e. do's and don'ts). However, at work, we have a few wooden > To address comments privately to the moderating team, please address: moderators@xxxxxxxxxxx For more info on the list, tech articles, cars for sale see www.dmcnews.com To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/dmcnews/ <*> To unsubscribe from this group, send an email to: dmcnews-unsubscribe@xxxxxxxxxxxxxxx <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/