Hi Group, I had an issue with the shifting appearing too rough, slipping when going from reverse to drive. Since I had only gotten a chance to driver her around a little I didn't think too much about it. Then in one of my trips I decided to look - low and behold the level was low! Then in my hast, and ignorance, I added the Dextron II (the bloody red stuff) - which thanks to Dave I just realized was a mistake! But to add to the collectives knowledge base, when I did this the car acted somewhat like Bob's. I had trouble going beyond second, unless I really drove it hard - fortunately I only did that once. Now - what's the best way to fix this? Drain, change filter, and fill with the gear oil? Should I use some sort of cleaning agent to get all the fluid out? Would it be OK to drain the fluid while I wait for the replacement filter? Any advise would greatly be appreciated. Luis & the limping 3723 To address comments privately to the moderating team, please address: moderators@xxxxxxxxxxx For more info on the list, tech articles, cars for sale see www.dmcnews.com To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/dmcnews/ <*> To unsubscribe from this group, send an email to: dmcnews-unsubscribe@xxxxxxxxxxxxxxx <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/