[DML] Re: Front frame extension questions.
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[DML] Re: Front frame extension questions.





You might want to check with a vendor anyway (I think most of them 
offer it) - about three posts back someone noted that European-built 
components look pretty expensive in the US given the exchange rate, 
which ought to make US-built parts not look so bad. I doubt anyone 
who's gone to the trouble of engineering such a component is going to 
give away the engineering design.

Dave S

--- In dmcnews@xxxxxxxxxxxxxxx, dmcjohn@xxxx wrote:
> 
> 
> Hi lads,
> I would like to have a front frame extension fabricated to replace 
> the one that is on my car. I've a few questions on this if anyone 
> could help, I would really appreciate it.
> 
> 1. Are the exact dimensions of the front frame extension available 
> anywhere? Any engineering drawings? 
> 
> 2. In Service Bulletin ST-03-2.82 
> 
> (http://www.dmcnews.com/bulletins/ST-03-2.82.html) 
> 









To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/dmcnews/

<*> To unsubscribe from this group, send an email to:
    dmcnews-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/
 





Home Back to the Home of PROJECT VIXEN 


Copyright ProjectVixen.com. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive

This site contains affiliate links for which we may be compensated