[DML] Clutch removal from Workshop Manual
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[DML] Clutch removal from Workshop Manual





Just a light hearted post that I thought I would share.

I just received my workshop manual DMCH and I was flicking throught it
when I came across the section on Clutch Slave Cylinder. The section
on removal has the following:

1. Raise vehicle on hoist
2. After engine exhaust has cooled, disconnect clutch line from slave
cylinder.
3. Remove 2 bolts securing slave cylinder to clutch fork.
4. Remove slave cylinder.

So removing the slave clutch cylinder should be a piece of cake! I
don't know what the fuss is all about :)

Max
PS. I hope I don't get in trouble for posting part of a page from the
manual.








To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/dmcnews/

<*> To unsubscribe from this group, send an email to:
    dmcnews-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/
 





Home Back to the Home of PROJECT VIXEN 


Copyright ProjectVixen.com. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive

This site contains affiliate links for which we may be compensated